11
case studies
ewi pro.
Silicone Render Onto EPS
Howgate Close is a spectacular achievement for passive solar design techniques utilising external wall insulation. The finished properties blend seamlessly with the surrounding rural environment, and the project achieves exceptional thermal comfort conditions.
Download
OCDC & Silicone Paint
One Coat Dash Cover (OCDC) is the perfect solution for covering over pebbledash without the hassle of removing it. EWI Pro high-performance Silicone Paint was used to finish off the finish on this property and give the facade a fresh look.
Download
EPS ONTO MIXED MASONRY
A mixed masonry substrate is a solid wall made of either brick, block or stone. Typically, mixed masonry walls do not retain heat well, so external wall insulation is recommended to improve a building's thermal comfort.
Download
PHENOLIC INSULATION ONTO BRICK
Kingspan K5 Phenolic insulation boards are made of high-quality phenolic foam. Phenolic insulation boards are CFC- and HCFC-free and have an ozone depletion potential of zero.
Download
RENDER ONTO PEBBLEDASH
One Coat Dash Cover (OCDC) is a lightweight, breathable and flexible solution for concealing pebbledash. OCDC can be applied up to 25mm thick and, once dry, provides a perfectly flat surface ready to topcoat or paint.
Download
EPS ONTO BRICK
Expanded polystyrene (EPS) is a high-performing thermal insulation material often used in our external wall insulation systems. It upgrades the thermal properties of a building, improving its U-Values and reducing the risk of water penetration and condensation.
Download
RENDER ONTO CARRIER BOARD
This exciting new build was constructed using a steel frame and completed with a decorative thin-coat system over render carrier board. Given their ability to withstand extreme weathering, movement and structure, render carrier boards provide an ideal foundation for thin-coat render systems.
Download
RENDER ONTO ICF
Insulated concrete form (ICF) is a system of formwork for reinforced concrete, usually made with a rigid thermal insulation that stays in place as an interior and exterior substrate for walls, floors and roofs.
Download
MINERAL WOOL ONTO METAL FRAME
Mineral wool is a fibrous material formed from a carefully controlled mix of raw materials used to compose Rockwool Dual Density Slabs. During the manufacturing process, the boards are formed to support the render system from shrinking or degrading and prevent overdriven fixings during installation.
Download
Our Products
Copyright © 2012-2023 EWIPRO LTD. All rights reserved
