PRODUCT CATEGORIES

RENDERS BASECOATS & ADHESIVES PRIMERS PAINTS THE LIME RANGE MESH BUILDING MATERIALS

EWI-212 High Polymer Render Coat

Product Overview

EWI-212 High Polymer Render Coat is a high-performance, polymer-modified, cement-based render. Suitable for hand or machine application, it is designed for use as a durable render coat and levelling layer on a wide range of mineral backgrounds. It offers strong adhesion, good workability, water and frost resistance, vapour permeability, flexibility, and improved resistance to cracking. Where required, it can also be reinforced with fibreglass mesh for added strength and stability beneath subsequent finishes.

Intended Uses

EWI-212 High Polymer Render Coat is suitable for use over substrates such as blockwork, masonry, stone, concrete,
aerated concrete, ceramic units, calcium silicate blocks, and suitably prepared existing renders, and is particularly useful where a strong, reliable bonding layer is required on dense or
challenging backgrounds.

EWI-212 High Polymer Render Coat is not intended for useas an insulation adhesive or basecoat.
HIGHLY POLYMER
MODIFIED
SPRAY OR
HAND APPLIED
CRACK
RESISTANT
VAPOUR-
PERMEABLE

Data Sheets

Product Data Sheet

Safety Data Sheet

Install Video Guide

VIDEO COMING SOON

Application Conditions

Application should be carried out in dry conditions and protected from rain, strong wind, direct sunlight and frost during installation and early curing. The product should not be applied when air or substrate temperatures are below 5°C or above 25°C. Protective sheeting should be used where necessary to protect freshly applied material and support consistent curing.

Discover our other Basecoats & Adhesives

EWI-225
Premium Basecoat
EWI-222P
Performance Basecoat
EWI-269
Lightweight Basecoat
EWI-260
Levelling Mortar
EWI-065
One Coat Dash Cover
EWI-220
EPS Basecoat
EWI-221
Rapid Set EPS Basecoat
EWI-226
Aquabase
EWI-240
EPS Adhesive