EWI-095 Dash Receiver

Product Overview

EWI-095 Dash Receiver is a cement-based, polymer-modified mortar designed to act as the receiving layer for dry dash or pebbledash finishes within EWI Pro external wall insulation systems. It provides a durable, water-resistant surface with strong adhesion and impact resistance, ensuring a reliable base for traditional dash aggregates. Factory blended for consistency, it delivers dependable performance when applied over reinforced basecoats as part of an approved EWI Pro system build-up.

Intended Uses

EWI-095 Dash Receiver is used as the receiving coat for dry dash aggregate finishes within EWI Pro systems. It is applied over reinforced basecoat layers to create a robust surface that allows dash aggregates to be embedded securely. The product is suitable for both new build and refurbishment projects where a traditional dashed façade finish is specified and must always be used as part of a complete EWI Pro system rather than as a standalone render.

EXCELLENT
ADHESION

VAPOUR-
PERMEABLE

WATER
REPELLENT

HIGHLY POLYMER
MODIFIED

Data Sheets

Product Data Sheet

DOWNLOAD

Safety Data Sheet

DOWNLOAD

Install Video Guide

VIDEO COMING SOON

Application Conditions

Substrates must be fully prepared and installed in accordance with EWI Pro system requirements before application. Insulation boards should be securely fixed and level, with a reinforced basecoat applied and cured prior to the dash receiver. The product should be mixed with clean water to achieve a stiff but workable mortar and applied evenly to the prepared basecoat using a steel trowel or suitable spray equipment at a typical thickness of 6–10 mm. While the mortar is still wet, dry dash aggregate should be cast onto the surface and lightly pressed to ensure proper embedment. Application should take place between +5°C and +25°C, avoiding rain, frost, strong winds or direct sunlight during curing.