FIND AN APPROVED INSTALLER

Technical Support

PRODUCT CATEGORIES

RENDERS BASECOATS & ADHESIVES PRIMERS PAINTS THE LIME RANGE MESH BUILDING MATERIALS

BUILDING MATERIALS

EWI-020 Render Accelerator

Render accelerator is a ready-to-use additive, designed to speed up the drying times of our Premium Bio Silicone, Silicone, Silicone Silicate and Nano Drex Silicone Render. This is ideal for use when carrying out rendering works in the winter or in cold weather as lower temperatures can have a negative impact on the curing rates of renders, thereby causing problems with the render further down the line. The EWI-020 is designed to limit these problems, allowing installers to continue using thin coat render products even in colder climates. When installing in cold conditions, the product is the ideal solution for preventing issues related to render curing.
Advantages of the Render Accelerator
Used to accelerate curing process
Fast completion of the job
Can be used in cold conditions
Safe to use without affecting performance of the render
Ensures successful render curing
Allows installers to continue working year-round
Incredibly easy to use
Application Conditions
Accelerator should be poured directly into the bucket of render and mixed thoroughly before use.
We recommend using 100ml of accelerator per 25kg bucket of render.
EWI-020 comes ready to use in 100ml bottles.
Downloads

EWI-250 Self-Levelling Compound

EWI Pro’s Ultimate leveller is our advanced Self-levelling compound, ideal for internal flooring in commercial and residential buildings or other places exposed to similar loads. The self-levelling compound EWI-250 provides a high-quality, sturdy finish to any flooring. Creating the perfect substrate for ceramic tiles, synthetic flooring and parquet flooring etc.
Intended Uses
The EWI Pro EWI-250 self-levelling compound has been designed for use on internal flooring and is suitable to be used on a variety of floor surfaces including underfloor heating. EWI-250 can be applied at a thickness ranging from 2-100mm. This quick-drying product provides the perfect substrate for ceramic tiles, synthetic flooring, parquet flooring, etc as it can be covered after 24 hours.
Application Conditions
Apply in temperatures above 5°C or below 25°C; this applies to air, groundwork, and product temperature. Do not apply to hot substrates, below 5°C or in direct sunlight. Such conditions must be maintained during the project and 24 hours after the ultimate leveller has been applied. 2 hours after application; you can stand on the substrate. Please note, we recommend testing the substrate first.

After 24 hours of applying the self-levelling compound, you can cover it with additional flooring materials. If more than 20mm is applied to the mixture, leave 1 additional day of drying for each extra 10mm of product.
Downloads

Pro Clean – Render Remover

EWI Pro Clean – Render Remover is the ideal product for removing unwanted silicone render, primers & basecoats. The unique formulation breaks down silicone render, removing it efficiently from windows, walls, and other unwanted areas. Pro Clean uses nano-energy cells which penetrate the render spillage and actively help lift it away.

It has been specially formulated to work on both dried and wet renders; it can also be used on cementitious products, including monocouche render and basecoats.

It is designed to cut cleaning times and costs in half, using less product by aiming to clean surfaces on the first use. Leave on spillage for 1 minute for general cleaning and 20 minutes for heaving soiling.
Intended Uses
The EWI Pro – Render Remover (5L) is effective on a wide variety of surfaces, including:
Stainless steel, plastic, wood, ceramic, glass, rubber, concrete, metal, vinyl floors and safety floors, uPVC cladding, canvas, and more.

PRO CLEAN IS A READY-TO-USE PRODUCT, DO NOT DILUTE WITH WATER.
Application Conditions
Spray EWI Pro Clean Render Remover onto the render spillage and leave for 20 minutes.
Try to keep the spillage wet (Spills may require further applications of Pro Clean).
Using a suitable cleaning implement (e.g., a wire brush or cloth), agitate the area to lift the unwanted render.
For stubborn spillages, repeat the process until removed.
Downloads

Nano Drex Protect – Render Guard

Nano Drex Protect Render Guard is the latest product from EWI Pro, designed to protect your render from the elements. The product is easily applied to existing render surfaces (either sand and cement, monocouche or thin coat render systems) and creates a breathable, protective barrier that prevents damage caused by rainwater or penetration of any dirt. Nano Drex Protect Render Guard dries clear with no gloss, and once dry it creates a vapour permeable layer reducing the absorbency of the surface.
Intended Uses
The Nano Drex Protect Render Guard is a great way to prevent any biological growth from appearing on existing render surfaces. In addition, the product also helps to prevent discolouration of the render after rainfall, ensuring a consistent look to your property regardless of the weather conditions. Finally Nano Drex Protect Render Guard can also help reduce energy bills and increase the warmth of your property by keeping underlying brick / block walls dry – heat escapes out of damp walls faster than dry walls.
Application Conditions
All render must be cleared of dust, soot, grease and anything else that might reduce the contact between the product and the render. Any surface covered in mould, algae or moss should first be treated with EWI-360 Fungicidal Wash. The product comes ready to use. Do not dilute the product with water or mix with other materials. Mix thoroughly before use. Apply Nano Drex Protect when the temperature is between 5˚C and 25˚C with a paintbrush or roller. The coverage rate for the Nano Drex Protect – Render Guard is approximately 0.15 litres per meter squared.

Nano Drex Protect – Brick Guard

Nano Drex Brick Guard is the latest product from EWI Pro, designed to protect your Brick work from the elements. The product is easily applied to existing Brick surfaces and creates a breathable, protective barrier that prevents damage caused by rainwater or penetration of any dirt. Nano Drex Brick Guard dries clear with no gloss, and once dry it creates a vapour permeable layer reducing the absorbency of the surface.
Intended Uses
The Nano Drex Brick Guard is a great way to prevent any biological growth from appearing on existing brick surfaces. In addition, the product also helps to prevent discolouration of the brick after rainfall, ensuring a consistent look to your property regardless of the weather conditions. Finally Nano Drex Brick Guard can also help reduce energy bills and increase the warmth of your property by keeping underlying brick / block walls dry – heat escapes out of damp walls faster than dry walls.
Application Conditions
All brick work must be cleared of dust, soot, grease and anything else that might reduce the contact between the product and the brick. Any surface covered in mould, algae or moss should first be treated with EWI-360 Fungicidal Wash. The product comes ready to use. Do not dilute the product with water or mix with other materials. Mix thoroughly before use. Apply Nano Drex Brick Guard when the temperature is between 5˚C and 25˚C with a paintbrush or roller. The coverage rate for the Nano Drex Brick Guard is approximately 0.15 litres per meter squared.